Peavey's 15" Aquarius AQ 15 2-way powered speaker brings power, efficiency, and world-class audio to any public address or sound reinforcement application. Possessing 1000 watts of onboard power driving a 15" woofer and 1.4 titanium tweeter with Peavey's Asymmetrical Quadratic Waveguide horn, the AQ 15 fills spaces with more sound, more efficiently, and with higher output than other speakers in its class. Internal DSP affords control over crossover settings, limiting, and selection of preset EQ modes if desired. A rear panel XLR-1/4" combo jack with a Mic/Line switch plus Bluetooth via wireless link, offer source input options with mix-out and thru for connection to mixers, subs, or another AQ 15 (all sold separately). Designed as a free-standing or pole-mount speaker, the AQ 15's trapezoidal enclosure will make it the singer's choice for a screaming floor wedge! Power, efficiency, sonic superiority. The Peavey Aquarius AQ 15.Peavey AQ15 Features:Two-way bi-amplified analog amp powered speaker system15" heavy-duty wooferDX14 compression driver, with 1.4 inch titanium diaphragm670 watts peak dynamic woofer power, 330 watts peak dynamic tweeter powerBluetooth streaming and pairing are supportedDSP processing is 56 bit double-precisionDSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade componentsDynamic bass boost functionFan cooled for maximum reliabilityPeavey Designed Quadratic Throat Waveguide© technology, 110 by 80 degree coverageInput is via a combo female XLR and 1/4 TRS phone jack with balanced input OR a Bluetooth signal can be streamed to the speaker system.A Mic/Line switch to accommodate a wide range of input signalsThru/Mix output is via a male XLR jackMultiple Factory Preset EQ settings for the DSP crossover systemRugged plastic injection-molded trapezoidal enclosureCabinet has dual rear corner angled sides for floor monitor use.Full-coverage perforated steel grille, with powder coat finishPole mount molded-in for 1 3/8 diameter poles.Peavey AQ15 Specifications:Frequency Response: 62 Hz to 19 kHz, +/- 6 dB, anechoic environmentUsable Low-Frequency limit (-10 dB point anechoic): 54 HzNominal sensitivity (1W @1M, swept sine input in an anechoic environment): 96 dB (average)Maximum Sound Pressure Gain (1 meter): 126 dB SPL peak with musicRadiation Angle measured at -6 dB point of polar response: Nominal: 110 degrees horizontal X 80 degrees vertical (Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +30, -50 degrees)Transducer Complement: Heavy-duty 15” woofer with 2.38” voice coil & 54 oz. magnet DX™14 1.4” titanium diaphragm dynamic compression driverBox Tuning Frequency: 53 HzElectroacoustic crossover frequency: 1,950 HzCrossover type: Internal Electronic DSP-based two-way crossover with driver EQ, level matching, bass boost, limiting and subsonic filtering.Crossover Slopes: Linkwitz-Riley 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with driver EQ incorporated.Input Connections: One combo female XLR / 1/4” phone jack providing balanced line-level operation from the 1 / 4” jack section, and the XLR section. Bluetooth® input via wireless link, with pairing options.Output Connections: One male XLR jack. The Thru/Mix jack is intended for the use of linking multiple PA™115 in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal. The Mix function converts this jack to provide a mixed signal of the input jack and the Bluetooth® source.Enclosure Materials & Finish: Black injection-molded plastic with a textured surface, black powder-coated perforated full-coverage grille.Mounting provisions: Four rubber feet provide vibration-free floor or stage use, and a molded-in stand mounting cup with industry specifications standard 1 3/8” inside diameter for use with subwoofer poles and speaker stands is on the bottom. Unit is not designed to be flown overhead.Overall Dimensions ( H x W x D ) 28.3”H x 16.75”W x 15.00”D 719 mm x 426 mm x 381 mmWeight: 44 lbs. (20.0 kg)ELECTRONICS AND AMPLIFIER SPECIFICATIONS:Internal power amplifiers (@120 VAC line):Total of 1000 watts peak dynamic powerWoofer - 670 watts peak dynamic powerSine Wave Power: 240 watts @ less than 1% distortion*Tweeter - 330 watts peak dynamic powerSine Wave Power: 120 watts @ less than 1% distortion * Before DSP compression and limiting engagesElectronic Input Impedance (Nominal):Line: 4.5 k ohms balanced (XLR or 1/4”)Mic: 4.5 k ohms balanced (XLR) No phantom power available.Input Sensitivity for Full Output (LEVEL full CW): 0.50 V RMS (Switch in LINE position)Input Overload Point (Switch in LINE position): +18 dBVInfrasonic filter protection: 36 dB/octave roll-offNominal Amplifier Frequency Response: +1, -3 dB from 20 Hz to 20 kHzHum and Noise: ... Pea