Radial Engineering Js2 Passive Mic Splitter, 1 Input, 2 Direct Outs, 1 Jensen Isolated Output
The Radial JS2 is a Jensen Transformer equipped mic splitter that allows a balanced source to drive multiple destinations via standard XLR connectors. The passive device features a premium nickel laminated core transformer for exceptionally low harmonic distortion without the usual phase shift caused by lesser steel core transformers.The undisputed benefit of 100% transformer isolated provides better than -90dB common mode noise rejection (CMR) thus eliminating troublesome hum & buzz caused by stray voltage and ground loops. The JS2 offers a simple yet highly effective interface for microphones or direct boxes, and with the addition of the -30dB pad, consumer and line level devices may be employed without distortion or fear of overload due to saturation.The Radial JS2 mic splitter features a rugged 14-gauge steel construction for maximum durability. A unique book-end design creates a protective zone for switches and connectors against the harsh environment of concert touring. An internal welded I-beam skeleton houses the PC board creating a virtually indestructible monocoque design that makes it impossible to torque the circuit board. This eliminates stress on the solder points which can cause cold solder joints to develop.Radial always provides high quality interfaces, so if you need a 2-way microphone splitter, don't look further than the JS2!Features100% isolation to eliminate ground loopsJensen transformer equipped for best soundMicrophone or line level signal handlingCompact design - may be J-Rak mountedUltra rugged 14-gauge steel constructionSpecificationsAudio Circuit Type: Passive mic/line splitter, transformer basedTransformer: JT-MB-CPC, 1:1 ratio# of Channels: Three-way splitter (one in/three out)Frequency Response: 20 Hz to 20 kHz (+0 dB / -2 dB)Dynamic Range: 140 dBTotal Harmonic Distortion: 0.0005% @ 1 kHzPhase Deviation: 0.7° @ 100 Hz; 2.8° @ 20 HzInput Connector: XLRInput Impedance: 2.4 kΩ, unbalancedMax. Input Level: +25 dBu @ 1 kHzOutput Connectors: XLR (one isolated)Output Impedance: 150 Ω, balancedConstruction: 14-gauge steel chassis and outer shellConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 2" x 3.3" x 5.0"Weight: 1.55 lbs (0.7 kg) Radial Engineering JS2 Passive Mic Splitter, 1 Input, 2 Direct Outs, 1 Jensen Isolated Output.
Price now:
From
$269.00
To
$284.99
Price History:
Details:Radial Engineering Js2 Passive Mic Splitter, 1 Input, 2 Direct Outs, 1 Jensen Isolated Output
The Radial JS2 is a Jensen Transformer equipped mic splitter that allows a balanced source to drive multiple destinations via standard XLR connectors. The passive device features a premium nickel laminated core transformer for exceptionally low harmonic distortion without the usual phase shift caused by lesser steel core transformers.The undisputed benefit of 100% transformer isolated provides better than -90dB common mode noise rejection (CMR) thus eliminating troublesome hum & buzz caused by stray voltage and ground loops. The JS2 offers a simple yet highly effective interface for microphones or direct boxes, and with the addition of the -30dB pad, consumer and line level devices may be employed without distortion or fear of overload due to saturation.The Radial JS2 mic splitter features a rugged 14-gauge steel construction for maximum durability. A unique book-end design creates a protective zone for switches and connectors against the harsh environment of concert touring. An internal welded I-beam skeleton houses the PC board creating a virtually indestructible monocoque design that makes it impossible to torque the circuit board. This eliminates stress on the solder points which can cause cold solder joints to develop.Radial always provides high quality interfaces, so if you need a 2-way microphone splitter, don't look further than the JS2!Features100% isolation to eliminate ground loopsJensen transformer equipped for best soundMicrophone or line level signal handlingCompact design - may be J-Rak mountedUltra rugged 14-gauge steel constructionSpecificationsAudio Circuit Type: Passive mic/line splitter, transformer basedTransformer: JT-MB-CPC, 1:1 ratio# of Channels: Three-way splitter (one in/three out)Frequency Response: 20 Hz to 20 kHz (+0 dB / -2 dB)Dynamic Range: 140 dBTotal Harmonic Distortion: 0.0005% @ 1 kHzPhase Deviation: 0.7° @ 100 Hz; 2.8° @ 20 HzInput Connector: XLRInput Impedance: 2.4 kΩ, unbalancedMax. Input Level: +25 dBu @ 1 kHzOutput Connectors: XLR (one isolated)Output Impedance: 150 Ω, balancedConstruction: 14-gauge steel chassis and outer shellConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 2" x 3.3" x 5.0"Weight: 1.55 lbs (0.7 kg) Radial Engineering JS2 Passive Mic Splitter, 1 Input, 2 Direct Outs, 1 Jensen Isolated Output.
Price now:
From
$269.00
To
$284.99
This site contains affiliate links for which we may be compensated.
Reverb (US)
0.00% (~ $$v)
New
$284.99
Full Compass Systems
3.64% (+ $10.00)
New
$284.99
Reverb (US) | $269.00Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Reverb (US) | $284.99Free Delivery | Store |
Full Compass Systems | $284.99Free Delivery | Store |
Currently Unavailable
Product Description
The Radial JS2 is a Jensen Transformer equipped mic splitter that allows a balanced source to drive multiple destinations via standard XLR connectors. The passive device features a premium nickel laminated core transformer for exceptionally low harmonic distortion without the usual phase shift caused by lesser steel core transformers.The undisputed benefit of 100% transformer isolated provides better than -90dB common mode noise rejection (CMR) thus eliminating troublesome hum & buzz caused by stray voltage and ground loops. The JS2 offers a simple yet highly effective interface for microphones or direct boxes, and with the addition of the -30dB pad, consumer and line level devices may be employed without distortion or fear of overload due to saturation.The Radial JS2 mic splitter features a rugged 14-gauge steel construction for maximum durability. A unique book-end design creates a protective zone for switches and connectors against the harsh environment of concert touring. An internal welded I-beam skeleton houses the PC board creating a virtually indestructible monocoque design that makes it impossible to torque the circuit board. This eliminates stress on the solder points which can cause cold solder joints to develop.Radial always provides high quality interfaces, so if you need a 2-way microphone splitter, don't look further than the JS2!Features100% isolation to eliminate ground loopsJensen transformer equipped for best soundMicrophone or line level signal handlingCompact design - may be J-Rak mountedUltra rugged 14-gauge steel constructionSpecificationsAudio Circuit Type: Passive mic/line splitter, transformer basedTransformer: JT-MB-CPC, 1:1 ratio# of Channels: Three-way splitter (one in/three out)Frequency Response: 20 Hz to 20 kHz (+0 dB / -2 dB)Dynamic Range: 140 dBTotal Harmonic Distortion: 0.0005% @ 1 kHzPhase Deviation: 0.7° @ 100 Hz; 2.8° @ 20 HzInput Connector: XLRInput Impedance: 2.4 kΩ, unbalancedMax. Input Level: +25 dBu @ 1 kHzOutput Connectors: XLR (one isolated)Output Impedance: 150 Ω, balancedConstruction: 14-gauge steel chassis and outer shellConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 2" x 3.3" x 5.0"Weight: 1.55 lbs (0.7 kg) Radial Engineering JS2 Passive Mic Splitter, 1 Input, 2 Direct Outs, 1 Jensen Isolated Output.
Product Specifications
General | |
|---|---|
Color | brown |
Material | plastic |
Brand | Radial |
Size | 30 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.