



The Audix M3 is an innovative, tri-element hanging microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance.The M3 incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating/air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.The M3 connects to the input of a mixer or DSP console via a breakout cable (provided). The breakout cable consists of a female RJ45 connector that terminates in either three terminal block or XLR connectors. A variety of optional shielded CAT7 cable lengths (from plenum rated junction box to break out cable) are available.Installing the M3 requires drilling just one 5/8-inch hole in the ceiling, with no additional tools needed. The M3 mounting hardware easily adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles. A wire safety cable provides additional seismic restraint.IncludesM3 Ceiling MicrophonePlenum-Rated Junction BoxSeismic/fire Strain ReliefBreakout CableFeatures100% RF shielding and immunityGold diaphragm condenser capsules with studio quality soundLow impedance design allows for extremely long cable runs (if required) without cross talk or interferenceFrequency and pattern tailored for voice clarity and rejection of extraneous noiseEvenly dispersed sound with undetectable phaseHigh-quality silicone jacketed microphone cable with adjustable length and positionPlenum rated junction box with RJ45 connectorAll visible components of the microphone and cable are same color: whiteTAA compliantVery high output, low self-noiseEasy to installSpecificationsType: CondenserPolar Pattern: HypercardioidFrequency Response: 30 Hz - 19kHz (Tailored)Optimized Response: 70 Hz - 9 kHzOutput Impedance: 150 Ohms balancedSensitivity: 23 mV / Pascal @ 1kOff Axis Rejection:1 capsule: >23 dB at 180°, relative to 0°2 capsules: >18 dB at 120°3 capsules: >9 dB at 60°Signal/Noise Ratio (A-weighted): 72 dBEquivalent Noise Level (A-weighted): 22 dB(A-weighted)Maximum SPL @ .5%THD: = 128 dBDynamic Range: 106 dBPower Requirements: 18 - 52 Volts phantomCable/Connector: Terminal block or XLRPolarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3Weight: 95 grams (mic only) / 3.32 ouncesDiameter: 50mm (2 inches)Length: 30mm (1.2 inches) Audix M3W Tri-Element Hanging Ceiling Microphone, White.
Price now:
From
To
Price History:
Details:The Audix M3 is an innovative, tri-element hanging microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance.The M3 incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating/air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.The M3 connects to the input of a mixer or DSP console via a breakout cable (provided). The breakout cable consists of a female RJ45 connector that terminates in either three terminal block or XLR connectors. A variety of optional shielded CAT7 cable lengths (from plenum rated junction box to break out cable) are available.Installing the M3 requires drilling just one 5/8-inch hole in the ceiling, with no additional tools needed. The M3 mounting hardware easily adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles. A wire safety cable provides additional seismic restraint.IncludesM3 Ceiling MicrophonePlenum-Rated Junction BoxSeismic/fire Strain ReliefBreakout CableFeatures100% RF shielding and immunityGold diaphragm condenser capsules with studio quality soundLow impedance design allows for extremely long cable runs (if required) without cross talk or interferenceFrequency and pattern tailored for voice clarity and rejection of extraneous noiseEvenly dispersed sound with undetectable phaseHigh-quality silicone jacketed microphone cable with adjustable length and positionPlenum rated junction box with RJ45 connectorAll visible components of the microphone and cable are same color: whiteTAA compliantVery high output, low self-noiseEasy to installSpecificationsType: CondenserPolar Pattern: HypercardioidFrequency Response: 30 Hz - 19kHz (Tailored)Optimized Response: 70 Hz - 9 kHzOutput Impedance: 150 Ohms balancedSensitivity: 23 mV / Pascal @ 1kOff Axis Rejection:1 capsule: >23 dB at 180°, relative to 0°2 capsules: >18 dB at 120°3 capsules: >9 dB at 60°Signal/Noise Ratio (A-weighted): 72 dBEquivalent Noise Level (A-weighted): 22 dB(A-weighted)Maximum SPL @ .5%THD: = 128 dBDynamic Range: 106 dBPower Requirements: 18 - 52 Volts phantomCable/Connector: Terminal block or XLRPolarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3Weight: 95 grams (mic only) / 3.32 ouncesDiameter: 50mm (2 inches)Length: 30mm (1.2 inches) Audix M3W Tri-Element Hanging Ceiling Microphone, White.
Price now:
From
To
This site contains affiliate links for which we may be compensated.
Full Compass Systems
5.94% (+ $79.00)
New
$1,410.00
Reverb (US) | $1,195.49$10.00 Delivery | |
Full Compass Systems | $1,410.00Free Delivery |
The Audix M3 is an innovative, tri-element hanging microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance.The M3 incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating/air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.The M3 connects to the input of a mixer or DSP console via a breakout cable (provided). The breakout cable consists of a female RJ45 connector that terminates in either three terminal block or XLR connectors. A variety of optional shielded CAT7 cable lengths (from plenum rated junction box to break out cable) are available.Installing the M3 requires drilling just one 5/8-inch hole in the ceiling, with no additional tools needed. The M3 mounting hardware easily adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles. A wire safety cable provides additional seismic restraint.IncludesM3 Ceiling MicrophonePlenum-Rated Junction BoxSeismic/fire Strain ReliefBreakout CableFeatures100% RF shielding and immunityGold diaphragm condenser capsules with studio quality soundLow impedance design allows for extremely long cable runs (if required) without cross talk or interferenceFrequency and pattern tailored for voice clarity and rejection of extraneous noiseEvenly dispersed sound with undetectable phaseHigh-quality silicone jacketed microphone cable with adjustable length and positionPlenum rated junction box with RJ45 connectorAll visible components of the microphone and cable are same color: whiteTAA compliantVery high output, low self-noiseEasy to installSpecificationsType: CondenserPolar Pattern: HypercardioidFrequency Response: 30 Hz - 19kHz (Tailored)Optimized Response: 70 Hz - 9 kHzOutput Impedance: 150 Ohms balancedSensitivity: 23 mV / Pascal @ 1kOff Axis Rejection:1 capsule: >23 dB at 180°, relative to 0°2 capsules: >18 dB at 120°3 capsules: >9 dB at 60°Signal/Noise Ratio (A-weighted): 72 dBEquivalent Noise Level (A-weighted): 22 dB(A-weighted)Maximum SPL @ .5%THD: = 128 dBDynamic Range: 106 dBPower Requirements: 18 - 52 Volts phantomCable/Connector: Terminal block or XLRPolarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3Weight: 95 grams (mic only) / 3.32 ouncesDiameter: 50mm (2 inches)Length: 30mm (1.2 inches) Audix M3W Tri-Element Hanging Ceiling Microphone, White.
General | |
|---|---|
Color | white |
Brand | Audix |
Gender | female |
Material | paper/silicone |
Size | 30 |
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.