Ashly Mx-206
Six channels of superior audio performance in a rugged, rackmountable unit.Alone or as part of a larger console, the MX-206 adds additional high-quality mic inputs to any live sound reinforcement, broadcast, recording, or film/video production setup. This rackmountable, stereo unit delivers up to 84dB of gain for distant mic placements or extremely low-level signals. Ultralow-noise, studio-grade, discrete mic preamps are accompanied by a switchable 20dB pad, three-position mic gain switch, input level and pan controls on each channel. 48V phantom power may be switched in for use with condenser mics. The MX-206 also has a Stereo Line In volume control for line level sources connected to the rear-panel RCA inputs or 3.5mm jack on the front panel. With plenty of headroom designed into the MX-206, even the loudest signals can be handled without distortion. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 Ohms, and separate stereo TRS 1/4" outputs may be used either balanced or unbalanced.FeaturesSix high-gain mic preamps (60dB)Transformer isolated +24dBm 600 Ohm balanced XLR-mono output+48V phantom power20dB input pad switch5-Year Worry-Free WarrantySpecificationsHD at +20 dBu, 20Hz-20KHz, input switch at -40dBIMD (SMPTE) at +20dBu, input switch at -40dBHUM & NOISE (20Hz-20KHz , input switch at -60dB)Equivalent input hum and noiseResidual output noise, TRS outputs, all levels at minimumResidual output noise, XLR outputsMaster Level at nominal, all Ch. Level controls at minMaster Level and one Ch. Level at nomMic Input to Master Output, 600 ohm loadAux In to Master OutputFrequency Response - 20Hz-20Khz +0/-0.5dBCrosstalk - between any inputs or outputs 20Hz-20KHzVU METERS - Two 6-segment LED meters 0VU = +4dBuPeak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping+48 VDC applied to all Mic Inputs, switchable on front panel.Maximum total current draw = 80mA.Maximum single channel current draw = 14mA.Gradual power-up and down to eliminate "pops".SHIPPING WEIGHT 13 lbs. MaximumPOWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 wattsDIMENSIONS:19" wide x 1.75" high x 8.0" deep. Ashly MX-206 6-Channel 1RU Stereo Microphone Mixer.
Price now:
From
$792.32
To
$1,049.99
Price History:
Details:Ashly Mx-206
Six channels of superior audio performance in a rugged, rackmountable unit.Alone or as part of a larger console, the MX-206 adds additional high-quality mic inputs to any live sound reinforcement, broadcast, recording, or film/video production setup. This rackmountable, stereo unit delivers up to 84dB of gain for distant mic placements or extremely low-level signals. Ultralow-noise, studio-grade, discrete mic preamps are accompanied by a switchable 20dB pad, three-position mic gain switch, input level and pan controls on each channel. 48V phantom power may be switched in for use with condenser mics. The MX-206 also has a Stereo Line In volume control for line level sources connected to the rear-panel RCA inputs or 3.5mm jack on the front panel. With plenty of headroom designed into the MX-206, even the loudest signals can be handled without distortion. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 Ohms, and separate stereo TRS 1/4" outputs may be used either balanced or unbalanced.FeaturesSix high-gain mic preamps (60dB)Transformer isolated +24dBm 600 Ohm balanced XLR-mono output+48V phantom power20dB input pad switch5-Year Worry-Free WarrantySpecificationsHD at +20 dBu, 20Hz-20KHz, input switch at -40dBIMD (SMPTE) at +20dBu, input switch at -40dBHUM & NOISE (20Hz-20KHz , input switch at -60dB)Equivalent input hum and noiseResidual output noise, TRS outputs, all levels at minimumResidual output noise, XLR outputsMaster Level at nominal, all Ch. Level controls at minMaster Level and one Ch. Level at nomMic Input to Master Output, 600 ohm loadAux In to Master OutputFrequency Response - 20Hz-20Khz +0/-0.5dBCrosstalk - between any inputs or outputs 20Hz-20KHzVU METERS - Two 6-segment LED meters 0VU = +4dBuPeak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping+48 VDC applied to all Mic Inputs, switchable on front panel.Maximum total current draw = 80mA.Maximum single channel current draw = 14mA.Gradual power-up and down to eliminate "pops".SHIPPING WEIGHT 13 lbs. MaximumPOWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 wattsDIMENSIONS:19" wide x 1.75" high x 8.0" deep. Ashly MX-206 6-Channel 1RU Stereo Microphone Mixer.
Price now:
From
$792.32
To
$1,049.99
This site contains affiliate links for which we may be compensated.
Reverb (US)
2.00% ( -$16.17)
Used
$792.32
$808.49
Full Compass Systems
10.54% (+ $100.00)
New
$1,049.00
Reverb (US) | $792.32$14.99 Delivery | Store |
Prime Buy | $860.00Free Delivery | Store |
Full Compass Systems | $1,049.00Free Delivery | Store |
Reverb (US) | $1,049.00Free Delivery | Store |
Reverb (US) | $1,049.99Free Delivery | Store |
Product Description
Six channels of superior audio performance in a rugged, rackmountable unit.Alone or as part of a larger console, the MX-206 adds additional high-quality mic inputs to any live sound reinforcement, broadcast, recording, or film/video production setup. This rackmountable, stereo unit delivers up to 84dB of gain for distant mic placements or extremely low-level signals. Ultralow-noise, studio-grade, discrete mic preamps are accompanied by a switchable 20dB pad, three-position mic gain switch, input level and pan controls on each channel. 48V phantom power may be switched in for use with condenser mics. The MX-206 also has a Stereo Line In volume control for line level sources connected to the rear-panel RCA inputs or 3.5mm jack on the front panel. With plenty of headroom designed into the MX-206, even the loudest signals can be handled without distortion. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 Ohms, and separate stereo TRS 1/4" outputs may be used either balanced or unbalanced.FeaturesSix high-gain mic preamps (60dB)Transformer isolated +24dBm 600 Ohm balanced XLR-mono output+48V phantom power20dB input pad switch5-Year Worry-Free WarrantySpecificationsHD at +20 dBu, 20Hz-20KHz, input switch at -40dBIMD (SMPTE) at +20dBu, input switch at -40dBHUM & NOISE (20Hz-20KHz , input switch at -60dB)Equivalent input hum and noiseResidual output noise, TRS outputs, all levels at minimumResidual output noise, XLR outputsMaster Level at nominal, all Ch. Level controls at minMaster Level and one Ch. Level at nomMic Input to Master Output, 600 ohm loadAux In to Master OutputFrequency Response - 20Hz-20Khz +0/-0.5dBCrosstalk - between any inputs or outputs 20Hz-20KHzVU METERS - Two 6-segment LED meters 0VU = +4dBuPeak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping+48 VDC applied to all Mic Inputs, switchable on front panel.Maximum total current draw = 80mA.Maximum single channel current draw = 14mA.Gradual power-up and down to eliminate "pops".SHIPPING WEIGHT 13 lbs. MaximumPOWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 wattsDIMENSIONS:19" wide x 1.75" high x 8.0" deep. Ashly MX-206 6-Channel 1RU Stereo Microphone Mixer.
Product Specifications
General | |
|---|---|
Brand | Ashly |
Size | extra large |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.