Bogen Hta250a Power Amplifier, 250W, 70V/25V
The Bogen HTA250A Power Amplifier is a high performance unit employing state-of-the-art Power MOSFET technology. The unique characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight.The Model HTA250A supplies 250 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL-600. Line bridging can be achieved with optional transformer Model TL-100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA250A can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70.7 volts. The amplifier is capable of safely driving any recommended load continuously. The HTA-250A is thermally protected to prevent damage due to excessively high temperatures; however, the amplifier will deliver the full rated output continuously, even at +49°C (+120°F). Additional failure-preventive devices include overload limiting, short circuit protection, and a Slo-Blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the ac line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally.FeaturesPower MOSFET circuitryCapable of continuous operation at rated output powerFrequency response ±1dB, 20 - 20,000Hz at full rated outputDistortion less than 0.5% THD, 20 - 20,000HzMultiple output voltages/impedances availableAutomatic overload protectionUL listedSpecificationsRated Output Power: 250 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 - 20,000HzFrequency Response: ±1dB, 20 - 20,000Hz at full rated outputInput Sensitivity: High impedance, 500mV; Low impedance balanced, with optional transformer, 150mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms, 8 ohms, 25VCT (2.5 ohms), 70.7V (20 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z, 50,000 ohms unbalanced;Lo-Z, 600 ohms, balanced or unbalanced1:1 bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front panel illuminated power and shutdown LED indicatorsRear Panel Input level control, Slo-Blo fuseInternal Low-Cut filterswitchPower Requirements: 120VAC, 60Hz, 520 watts @ Full Rated Output (Idle,60W)Overload Protection:Electronic overload protectionElectrical 7A Slo-BloFuseThermal 105 C (220 F) ThermostatOperating Temperature Range: -4°F (-20°C) to +120°F (+49°C) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300 watts maximumDimensions (W x D x H w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 50 lbs. (22.7 kg)Accessories:line-matching transformer (ModelTL-600)1:1 line-matching transformer (ModelTL-100) Bogen HTA250A Power Amplifier, 250W, 70V/25V.
Price now:
From
$1,284.12
To
$1,292.10
Price History:
Details:Bogen Hta250a Power Amplifier, 250W, 70V/25V
The Bogen HTA250A Power Amplifier is a high performance unit employing state-of-the-art Power MOSFET technology. The unique characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight.The Model HTA250A supplies 250 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL-600. Line bridging can be achieved with optional transformer Model TL-100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA250A can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70.7 volts. The amplifier is capable of safely driving any recommended load continuously. The HTA-250A is thermally protected to prevent damage due to excessively high temperatures; however, the amplifier will deliver the full rated output continuously, even at +49°C (+120°F). Additional failure-preventive devices include overload limiting, short circuit protection, and a Slo-Blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the ac line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally.FeaturesPower MOSFET circuitryCapable of continuous operation at rated output powerFrequency response ±1dB, 20 - 20,000Hz at full rated outputDistortion less than 0.5% THD, 20 - 20,000HzMultiple output voltages/impedances availableAutomatic overload protectionUL listedSpecificationsRated Output Power: 250 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 - 20,000HzFrequency Response: ±1dB, 20 - 20,000Hz at full rated outputInput Sensitivity: High impedance, 500mV; Low impedance balanced, with optional transformer, 150mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms, 8 ohms, 25VCT (2.5 ohms), 70.7V (20 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z, 50,000 ohms unbalanced;Lo-Z, 600 ohms, balanced or unbalanced1:1 bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front panel illuminated power and shutdown LED indicatorsRear Panel Input level control, Slo-Blo fuseInternal Low-Cut filterswitchPower Requirements: 120VAC, 60Hz, 520 watts @ Full Rated Output (Idle,60W)Overload Protection:Electronic overload protectionElectrical 7A Slo-BloFuseThermal 105 C (220 F) ThermostatOperating Temperature Range: -4°F (-20°C) to +120°F (+49°C) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300 watts maximumDimensions (W x D x H w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 50 lbs. (22.7 kg)Accessories:line-matching transformer (ModelTL-600)1:1 line-matching transformer (ModelTL-100) Bogen HTA250A Power Amplifier, 250W, 70V/25V.
Price now:
From
$1,284.12
To
$1,292.10
This site contains affiliate links for which we may be compensated.
Full Compass Systems
2.92% ( -$38.82)
New
$1,292.10
The Twister Group (US & Canada) | $1,284.12$111.29 Delivery | Store |
The Twister Group | $1,284.12$111.29 Delivery | Store |
Full Compass Systems | $1,292.10Free Delivery | Store |
Currently Unavailable
Product Description
The Bogen HTA250A Power Amplifier is a high performance unit employing state-of-the-art Power MOSFET technology. The unique characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight.The Model HTA250A supplies 250 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL-600. Line bridging can be achieved with optional transformer Model TL-100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA250A can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70.7 volts. The amplifier is capable of safely driving any recommended load continuously. The HTA-250A is thermally protected to prevent damage due to excessively high temperatures; however, the amplifier will deliver the full rated output continuously, even at +49°C (+120°F). Additional failure-preventive devices include overload limiting, short circuit protection, and a Slo-Blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the ac line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally.FeaturesPower MOSFET circuitryCapable of continuous operation at rated output powerFrequency response ±1dB, 20 - 20,000Hz at full rated outputDistortion less than 0.5% THD, 20 - 20,000HzMultiple output voltages/impedances availableAutomatic overload protectionUL listedSpecificationsRated Output Power: 250 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 - 20,000HzFrequency Response: ±1dB, 20 - 20,000Hz at full rated outputInput Sensitivity: High impedance, 500mV; Low impedance balanced, with optional transformer, 150mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms, 8 ohms, 25VCT (2.5 ohms), 70.7V (20 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z, 50,000 ohms unbalanced;Lo-Z, 600 ohms, balanced or unbalanced1:1 bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front panel illuminated power and shutdown LED indicatorsRear Panel Input level control, Slo-Blo fuseInternal Low-Cut filterswitchPower Requirements: 120VAC, 60Hz, 520 watts @ Full Rated Output (Idle,60W)Overload Protection:Electronic overload protectionElectrical 7A Slo-BloFuseThermal 105 C (220 F) ThermostatOperating Temperature Range: -4°F (-20°C) to +120°F (+49°C) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300 watts maximumDimensions (W x D x H w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 50 lbs. (22.7 kg)Accessories:line-matching transformer (ModelTL-600)1:1 line-matching transformer (ModelTL-100) Bogen HTA250A Power Amplifier, 250W, 70V/25V.
Product Specifications
General | |
|---|---|
Brand | BOGEN |
Size | 20 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.