Toa Da-250Dh Cu Digital Power Amplifier 2X 250W 70V 1X 500W Bridged At 140V (1U)
The DA-250DH is a 2-Channel Digital Power Amplifier designed for 70 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. It delivers 250 W x 2 channels (40 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be electrically isolated from the high-impedance speaker system by attaching the MT-251H Output Transformer (optional). It can be mounted in an EIA Standard equipment rack (1 unit size).Features:70 V speaker outputs2x 250 W rated powerClass D design 85 % efficientIndependent power supply for each channelLight weight and compactStack up to 5 units without open spaces between unitsSelectable stereo or bridge operation (DA-250D)Forced-air cooling systemLow heat dissipationComprehensive protection circuitryRemovable dust filters for easy maintenanceThe dual-channel power amplifier shall use digital class-D circuit topology and shall be configurable to allow two, three or four channel operation. Power output in two-channel mode with all channels driven shall be: 250W per channel into 40 ohms (100V). Total harmonic distortion (THD) shall be less than 0.1% (1kHz), 0.3 % (100 to 20,000 Hz). The frequency response shall be 50 to 20,000 Hz (-3 dB, +1 dB). The crosstalk shall be 70 dB (A-weighted). The input impedance shall be 10k ohms for each input into an electronically balanced input circuit. Rear panel switches shall allow selection of bridged operation 1-2 channels.A rear channel input mode switch shall allow the selection of input 1 to all mode, whereby the signal from input 1 is simultaneously fed to other channel. Each input shall feature a 3 pin phoenix block and XLR connector. Rear panel output connector shall be a heavy-gauge M4 screw-terminal barrier strip suitable for use with spade lugs or up to #12 AWG bare wires. The front panel attenuators shall be recessed to prevent accidental level changes and may be removed and replaced by included security covers once levels have been properly set. The front panel shall have two sets of four LED indicators to indicate the following conditions: signal presence at input (greater than -20 dB), signal presence at output (greater than 1 W at 40 ohms load), peak clipping, and protection circuit activation. The front panel shall also have two removable air filters that may be removed for cleaning without removing the amplifier from the rack.The amplifier shall be forced-air fan cooled with the air intake at the front and exhaust at the rear. Built-in protection circuitry shall monitor voltage and current levels to minimize potential damage from overloads and disable output during shorts, DC offset or excessive operating temperature at power amp heat sink over 100°C or excessive temperature inside the unit over 80°C via a relay for each channel. The relay shall also delay amplifier connection to the load during turn-on for about 2 seconds, so as to prevent any occurrence of noise at turn-on. Power consumption shall be 120W (based on EN standards) and 580W (rated output 40 ohms x 2 channels).Package includes:Power AmplifierPower cord (2 m (6.56 ft) x 1Removable terminal plug (3 pins) x 2Tamper-proof cap x 2For more information, please see Data Sheet
Price now:
From
$1,289.00
To
$1,510.40
Price History:
Details:Toa Da-250Dh Cu Digital Power Amplifier 2X 250W 70V 1X 500W Bridged At 140V (1U)
The DA-250DH is a 2-Channel Digital Power Amplifier designed for 70 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. It delivers 250 W x 2 channels (40 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be electrically isolated from the high-impedance speaker system by attaching the MT-251H Output Transformer (optional). It can be mounted in an EIA Standard equipment rack (1 unit size).Features:70 V speaker outputs2x 250 W rated powerClass D design 85 % efficientIndependent power supply for each channelLight weight and compactStack up to 5 units without open spaces between unitsSelectable stereo or bridge operation (DA-250D)Forced-air cooling systemLow heat dissipationComprehensive protection circuitryRemovable dust filters for easy maintenanceThe dual-channel power amplifier shall use digital class-D circuit topology and shall be configurable to allow two, three or four channel operation. Power output in two-channel mode with all channels driven shall be: 250W per channel into 40 ohms (100V). Total harmonic distortion (THD) shall be less than 0.1% (1kHz), 0.3 % (100 to 20,000 Hz). The frequency response shall be 50 to 20,000 Hz (-3 dB, +1 dB). The crosstalk shall be 70 dB (A-weighted). The input impedance shall be 10k ohms for each input into an electronically balanced input circuit. Rear panel switches shall allow selection of bridged operation 1-2 channels.A rear channel input mode switch shall allow the selection of input 1 to all mode, whereby the signal from input 1 is simultaneously fed to other channel. Each input shall feature a 3 pin phoenix block and XLR connector. Rear panel output connector shall be a heavy-gauge M4 screw-terminal barrier strip suitable for use with spade lugs or up to #12 AWG bare wires. The front panel attenuators shall be recessed to prevent accidental level changes and may be removed and replaced by included security covers once levels have been properly set. The front panel shall have two sets of four LED indicators to indicate the following conditions: signal presence at input (greater than -20 dB), signal presence at output (greater than 1 W at 40 ohms load), peak clipping, and protection circuit activation. The front panel shall also have two removable air filters that may be removed for cleaning without removing the amplifier from the rack.The amplifier shall be forced-air fan cooled with the air intake at the front and exhaust at the rear. Built-in protection circuitry shall monitor voltage and current levels to minimize potential damage from overloads and disable output during shorts, DC offset or excessive operating temperature at power amp heat sink over 100°C or excessive temperature inside the unit over 80°C via a relay for each channel. The relay shall also delay amplifier connection to the load during turn-on for about 2 seconds, so as to prevent any occurrence of noise at turn-on. Power consumption shall be 120W (based on EN standards) and 580W (rated output 40 ohms x 2 channels).Package includes:Power AmplifierPower cord (2 m (6.56 ft) x 1Removable terminal plug (3 pins) x 2Tamper-proof cap x 2For more information, please see Data Sheet
Price now:
From
$1,289.00
To
$1,510.40
This site contains affiliate links for which we may be compensated.
Selectum LLC
0.00% (~ $$v)
New
$1,510.40
Prime Buy | $1,289.00Free Delivery | Store |
Selectum LLC | $1,510.40Free Delivery | Store |
Product Description
The DA-250DH is a 2-Channel Digital Power Amplifier designed for 70 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. It delivers 250 W x 2 channels (40 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be electrically isolated from the high-impedance speaker system by attaching the MT-251H Output Transformer (optional). It can be mounted in an EIA Standard equipment rack (1 unit size).Features:70 V speaker outputs2x 250 W rated powerClass D design 85 % efficientIndependent power supply for each channelLight weight and compactStack up to 5 units without open spaces between unitsSelectable stereo or bridge operation (DA-250D)Forced-air cooling systemLow heat dissipationComprehensive protection circuitryRemovable dust filters for easy maintenanceThe dual-channel power amplifier shall use digital class-D circuit topology and shall be configurable to allow two, three or four channel operation. Power output in two-channel mode with all channels driven shall be: 250W per channel into 40 ohms (100V). Total harmonic distortion (THD) shall be less than 0.1% (1kHz), 0.3 % (100 to 20,000 Hz). The frequency response shall be 50 to 20,000 Hz (-3 dB, +1 dB). The crosstalk shall be 70 dB (A-weighted). The input impedance shall be 10k ohms for each input into an electronically balanced input circuit. Rear panel switches shall allow selection of bridged operation 1-2 channels.A rear channel input mode switch shall allow the selection of input 1 to all mode, whereby the signal from input 1 is simultaneously fed to other channel. Each input shall feature a 3 pin phoenix block and XLR connector. Rear panel output connector shall be a heavy-gauge M4 screw-terminal barrier strip suitable for use with spade lugs or up to #12 AWG bare wires. The front panel attenuators shall be recessed to prevent accidental level changes and may be removed and replaced by included security covers once levels have been properly set. The front panel shall have two sets of four LED indicators to indicate the following conditions: signal presence at input (greater than -20 dB), signal presence at output (greater than 1 W at 40 ohms load), peak clipping, and protection circuit activation. The front panel shall also have two removable air filters that may be removed for cleaning without removing the amplifier from the rack.The amplifier shall be forced-air fan cooled with the air intake at the front and exhaust at the rear. Built-in protection circuitry shall monitor voltage and current levels to minimize potential damage from overloads and disable output during shorts, DC offset or excessive operating temperature at power amp heat sink over 100°C or excessive temperature inside the unit over 80°C via a relay for each channel. The relay shall also delay amplifier connection to the load during turn-on for about 2 seconds, so as to prevent any occurrence of noise at turn-on. Power consumption shall be 120W (based on EN standards) and 580W (rated output 40 ohms x 2 channels).Package includes:Power AmplifierPower cord (2 m (6.56 ft) x 1Removable terminal plug (3 pins) x 2Tamper-proof cap x 2For more information, please see Data Sheet
Product Specifications
General | |
|---|---|
Size | 2 |
Brand | Toa |
Material | mode |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.